These resistive loads enclosed in vented aluminum boxes can be used in 12-, 24- and 48-volt diversion regulation systems.
These resistive loads enclosed in vented aluminum boxes can be used in 12-, 24- and 48-volt diversion regulation systems. The aluminum box may get very hot in operation. It should be mounted on a nonflammable surface and should be at least 12" from any flammable material.
· HL-100 is shipped as a 4-ohm resistor and can be reconfigured as a 1-, 0.5- or 0.25-ohm resistor by easily changing connections in the terminal block.
· HL-75 is shipped as a 3-ohm resistor and can be reconfigured as a 0.75-ohm resistor by changing connections in the terminal block.
See chart below for diverted amps at various voltages. 2-year warranty.
|
Model |
Resistance Setting (Ohms) |
Diversion Load Amps at Voltage below |
|
|
14 Volts |
15 Volts |
28 Volts |
30 Volts |
56 Volts |
60 Volts |
Item code |
|
HL-100 |
0.25 |
56 |
60 |
|
|
|
|
21.9330 |
| 0.50 |
28 |
30 |
|
|
|
|
| 1.0 |
14 |
15 |
28 |
30 |
|
|
| 4.0 |
3.5 |
3.8 |
7 |
7.5 |
14 |
15 |
|
HL-75 |
Series |
19 |
20 |
38 |
40 |
|
|
21.9335 |
| Single |
4.7 |
5 |
9.3 |
10 |
19 |
20 |
Learn More About Diversion Control
Sign In
