Description:
Water Misers are molded plastic "flip-top" vent caps designed to reduce and ease maintenance on flooded Lead-Acid batteries. There is no need to remove the caps when charging, filling, or equalizing the batteries. When charging, the plastic pellets capture up to 90% of the moisture and acid droplets. This reduces acid fumes, corrosion, and keeping the battery tops much cleaner and dryer. Excess water is dropped back into the battery cell. Water loss is reduced, which extends time between watering.

For example, the Trojan T-105 battery is a 6V battery with three 2V cells. The cap from each cell is replaced by the Water-Miser Hydrocap. These caps fit almost all batteries made for the U.S., including industrial batteries and most semi-industrial and golf cart batteries.

Features:
· Acid Proof Plastic construction
· Flip-top design does not need to be remove for watering, inspection or charging
· Capture up to 90% of the moisture and acid droplets that try to excape during charging
· The top of the cap sits 1.5" above the battery. Allow another 1" for the filler cap to open (at least).